品牌：RETZ/我們一直致力于流體控制領域的持續創新，始于2005……進口隔膜式不銹鋼安全閥、不銹鋼背壓閥在現場可通過調節螺絲借助管路中的壓力表在0-1.0Mpa范圍內設置壓力，泄放壓力一般設置高于系統壓力0.1-0.2Mpa，安全閥調壓不允許超過泵的大壓力，安裝一般盡量靠近泵的出口處，泵與安全閥之間不應有任何閥門，保護泵的安全和系統的正常運行Imported stainless steel safety valves and stainless steel back pressure valves can be set within the range of 0-1.0Mpa on site by adjusting screws with the help of a pressure gauge in the pipeline. The relief pressure is generally set to be 0.1-0.2Mpa higher than the system pressure. The pressure adjustment of the safety valve should not exceed the maximum pressure of the pump, and installation should generally be as close as possible to the pump outlet. There should be no valves between the pump and the safety valve to protect the safety of the pump and the normal operation of the system
規格Specification:0~1.0MPa、0.2~1.6MPa
適用溫度Temperature：≤80℃
設定背壓范圍Set back pressure range：0~1.0MPa、0.2~1.6MPa
材質Materia：SUS304、SUS316LF
連接方式：絲扣、法蘭 screw threads, flanges
隔膜材質：PTFE+橡膠復合 Diaphragm material: PTFE+rubber composite
進口隔膜式不銹鋼安全閥、不銹鋼背壓閥性能特點 Performance characteristics
釋放管路壓力，保證系統壓力穩定 Release pipeline pressure to ensure stable system pressure
保護泵的安全和系統的正常運行 Protect the safety of the pump and the normal operation of the system
與脈沖阻尼器配合使用減小水錘對系統的危害，達到*的低振動調節效果 Combined with pulse dampers to reduce the harm of water hammer to the system and achieve superior low vibration regulation effect
減小流速波動的峰值，保護管路系統不受壓力波動的沖擊 Reduce the peak value of flow rate fluctuations and protect the pipeline system from pressure fluctuations
隔膜采用*的PTFE+橡膠復合工藝，幾乎適用于所有腐蝕性流體，密封可靠無泄漏 The diaphragm adopts advanced PTFE+rubber composite technology, which is almost suitable for all corrosive fluids, with reliable sealing and no leakage
富林克致力于作為流體控制專家，負責中國地區RETZ產品的營銷管理和服務，從而創造價值的企業，RETZ以“堅持更好的品質"為根本，以“持續實現具有創造性、高品質產品和服務的企業價值，為當今社會的繁榮作出貢獻"為企業理念
